Alarmingly, less is more

This blog is by Mark Glitherow, Key Account Manager for UK Trend

Trend’s Key Account Manager, Mark Glitherow, explains why the generation of too many individual alarms is deterring end users from configuring a BEMS to undertake the monitoring of their key compliance needs.

When given the choice, most end users with a fully optimised BEMS opt for as many alarms to be configured as possible. On one level this is understandable, as it usually doesn’t cost them anymore and they might think that it’s better to be alerted to a potential issue than not be notified at all.

The reality leads to what can only be described as the ‘boy who cried wolf’ scenario, where so many alarms are generated that they are soon ignored and considered a nuisance. This was recently highlighted to me at a seminar of healthcare professionals, who all felt that in order to mitigate the risk of legionella they would rather manually check temperatures of tank held water than receiving alarm based notifications from a BEMS. The reason for this was purely down to the high levels of alarms that they already receive.

This situation is both worrying and frustrating, given that a BEMS should be a focal point in ensuring delivery of a compliant, resilient and sustainable built environment. A BEMS should support decision making but do so in a way that provides genuine value, rather than allowing generic, worthless alarms to complicate a user experience.

One answer to this conundrum is to reduce the volume of alarms and rationalise the amount that are set, so that the end user can gauge the importance of a notification. Alternatively, a graphical user interface (GUI) such as the Trend 963 Supervisor could be used to improve the presentation of valuable information so that users quickly recognise situations requiring their attention. The 963 Supervisor could create clear, relevant and succinct metrics – the premise being to create indicators that are just as effective as the actions they are intended to instigate.

These visual indicators can be configured to suit the exacting needs of the end user and be based upon an understanding of specific objectives, how they are to be achieved and who is going to action them. They could take the form of dashboards, ‘traffic light’ style devices or graphs.

A BEMS that issues alarms in a more structured, meaningful and discerning way is far more useful that one that simply bombards the end user with notifications that are ignored. Integrators and end users, therefore, need to work together to decide upon levels of importance for different events and configure the BEMS appropriately. It is simply a case of less being more.

For further information please call Trend Marketing on 01403 211888 or email marketing@trendcontrols.com

Always look on the bright side

This post is by Casey Wells, Trend’s UK Marketing Manager

I’m Casey Wells, UK Marketing at Trend, and in this blog talk about how integrating lighting along with heating, ventilation and air conditioning (HVAC) into a BEMS can bring together the largest consumers of electrical energy in a building and why such integration makes sense.

According to recent industry studies, lighting accounts for 19-23 per cent of the energy used in a building, with 40-52 per cent normally being used for HVAC. This means that companies have the potential to control up to 75 per cent of their energy usage through a BEMS.

Although controlling HVAC installations by BEMS is well known, many people are still unaware of the benefits of integrating lighting control. Devices like the Trend 963 Supervisor use dashboards that visualise lighting and HVAC points on a common head-end and detail the occupancy status of different zones, as well as the current luminaire status in each area.

The normal pattern of a working week can also be catered for automatically and lighting can, for example, be scheduled to turn on and off at certain times. Of course, life doesn’t always operate to a fixed schedule, so a BEMS can offer timed schedule over-rides to cater for changes such as a late networking event.

An additional benefit for integrating lighting with a BEMS is increased levels of safety and reliability. For example, emergency lighting can be continuously monitored by the BEMS. If an irregularity does occur, the BEMS will be configured to email the facilities manager or other designated person, and provide a complete report.

Building and facilities managers have much to gain from using a BEMS that integrates lighting control. With such a system, they can take advantage of real time energy monitoring and proactively save energy.

For further information please call Trend Marketing on 01403 211888 or email marketing@trendcontrols.com.

A BEMS is the key to unlocking a more sustainable and resilient data centre

Sam Fitzgerald, Key Account Manager at Trend Control Systems

Sam Fitzgerald, Key Account Manager at Trend Control Systems

Sam Fitzgerald, Key Account Manager at Trend Control Systems, explains the functions of a Building Energy Management System (BEMS) and the vital role this technology can play in today’s state-of-the-art data centres.

In order to minimise the potential for downtime, data centres must be resilient, compliant with all relevant standards and operating procedures, while at the same time minimising overall energy consumption. BEMS have the proven ability to maintain the high levels of uptime and energy efficiency that are demanded by users by proactively monitoring, analysing, understanding and improving a data centre’s building services infrastructure.

Under control

A BEMS monitors, manages and controls building services and plant by ensuring that it operates at maximum levels of efficiency and reliability. It does this by maintaining the optimum balance between conditions, energy use and operating requirements.

By controlling an entire estate’s building services from a centrally managed location, it enhances the ability to interact with, and improve the quality of, the data centre infrastructure. Intelligently understanding and responding to patterns of usage means that, for example, cooling can be fully optimised and lighting turned off in unoccupied areas.

Being aware of the way a data centre works makes it possible to determine which best practices to implement in order to protect IT assets, while minimising costs and the potential for downtime.

Energy levels

It is estimated that data centres account for around three per cent of the world’s total energy consumption and with growing use of the cloud and the rise of the Internet of Things, that figure is only going to go up. Furthermore, according to the Digital Power Group, the sector uses 50 per cent more energy than global aviation and is now considered one of the major sources of global CO2 emissions.

Efficient use of energy is clearly no longer an option and there is a growing raft of legislation and regulation that is specifically designed to ensure that energy consumption and carbon emissions are measured accurately, and that any applicable data is available for analysis.

Given that up to 84 per cent of a data centre’s energy consuming devices can be directly under its control, a BEMS is without doubt the most effective way to gain a true understanding of where savings can be made, monitored and sustained. A properly specified, installed and maintained BEMS will ensure that building services operate in strict accordance with demand, which will also help to deliver the lowest power usage effectiveness (PUE) rating.

Far from being ‘fit and forget’, a BEMS can evolve with the building over a period of time. It must be regularly maintained and, where necessary, adjusted to ensure that it provides the best possible quality of service.

The bigger picture

Sustainability isn’t just about energy usage though. A BEMS can also limit wear and tear on plant equipment by using it more efficiently and making sure that any maintenance issues are highlighted.

In addition, a properly configured BEMS will be scalable, future proof and full backwards compatible. A system that allows easy upgrading and reconfiguration is always preferable – not all systems are the same and the costs of installation can vary depending on the protocol used.

Trend is committed to ensuring the backwards compatibility of its technology. For example, its new IQ®4 controllers are able to communicate with the very first device that it manufactured way back in 1982. The IQ®4 modules are also interchangeable for additional future proofing, scalability and system longevity – all of which can protect the financial investment in a BEMS.

Always on

According to research carried out by Emerson Network Power and the Ponemon Institute, the cost of data centre downtime is just over $7,900 per minute. Total data centre outages in 2013 averaged a recovery time of 119 minutes, equating to about $901,500 in total cost.

As well as being incredibly inconvenient, it’s the damage to mission critical data, impact on organisational productivity, harm to equipment, legal and regulatory repercussions and lost confidence and trust among key stakeholders that can prove difficult to recover from. A data centre should therefore look to build resilience into its operation via a BEMS, minimising any risks associated with situations such as plant failure or environmental conditions falling outside acceptable parameters.

Alarms can be programmed into a BEMS, so that in the event of equipment malfunction the problem can be identified and rectified as quickly as possible. For instance, on an air-handling unit, if a flow sensor highlights that airflow is decreasing it is likely to mean that a filter is blocked. Addressing problems like this early on will ensure that temperature conditions in a data centre remain within those agreed in a service level agreement (SLA), minimising the possibility of penalties. A BEMS can also minimise the amount of time required to carry out such tasks by either automating them or undertaking comprehensive data acquisition.

Rules and regulations

Compliance with statutory legislation, key performance indicators (KPIs) and SLAs are fundamental to the success of any data centre.

A BEMS provides overall visibility of plant energy use and allows personnel to see in real time what’s happening within a facility, therefore helping to make sure that equipment stays within a manufacturer’s specified temperature and/or humidity range. In addition, details of data centre conditions on a 24/7 basis can be logged to provide a full audit trail.

A growing number of data centre operators are also choosing to put an energy management system (EnMS) in place to achieve compliance with ISO 50001 or the standards used to measure data centre efficiency developed by The Green Grid. Having a BEMS in place will help demonstrate a desire to continually improve a data centre’s energy efficiency.

Therefore, the requirement for this technology in data centres is only set to increase.

For further information please call Trend Marketing on 01403 211888 or email marketing@trendcontrols.com.

Twitter | LinkedIn | Google+ | YouTube

Think in £s not kWhs and Start Reaping the Rewards

Steve Browning is Marketing Manager of Trend Controls, a BSRIA member company

Steve Browning is Marketing Manager of Trend Controls, a BSRIA member company

Often considered an unwelcome expense, the truth is that investing in energy saving initiatives offers significant financial benefits, as well as enhancing an organisation’s environmental credentials. I’m Steve Browning, marketing manager of Trend Control Systems and in this blog I will explain how a Building Energy Management System (BEMS) can increase the bottom line.

Although better energy management and the need to reduce carbon emissions are both moving to the forefront of the corporate agenda, they are doing so far too slowly. Rising prices, combined with the increasing scarcity of resources and a growing raft of environmental legislation, means that addressing the issue of how energy is used is no longer just an option, but something that requires serious attention by all businesses.

To put the issue into perspective, the long-term framework outlined by the Department of Energy and Climate Change (DECC) sets out plans for achieving the reductions stated in the Climate Change Act 2008. When compared to 1990 levels, this equates to a reduction of at least 34 per cent by 2020 and at least 80 per cent by 2050. As they are responsible for 17 per cent of the UK’s carbon emissions, the nation’s 1.8 million non-domestic buildings are at the very heart of meeting this challenge.

The government is also ramping up the pressure to comply. In addition to the CRC Energy Efficiency Scheme, the Climate Change Levy (CCL), Air Conditioning Assessments, Display Energy Certificates (DECs) and Energy Performance Certificates (EPCs), earlier this year the Energy Savings Opportunity Scheme (ESOS) was introduced to address the requirements laid out in Article 8 of the European Union (EU) Energy Efficiency Directive.

It means that ‘large enterprises’ employing 250 or more staff, or that have an annual turnover of in excess of around £42m and an annual balance sheet total of around £36m, must complete regular energy audits. The first must be undertaken by 5th December 2015, and then at least every four years.

The government hopes that ESOS will drive the take-up of energy efficiency measures amongst businesses, enhancing their competitiveness and contributing to the wider growth agenda. Furthermore, for organisations wishing to comply with increasingly popular international standards such as ISO 50001, a certified energy management system (EnMS) must be in place.

It is therefore a constant source of bemusement and irritation to me that some organisations aren’t making the obvious correlation between investing in technology that can reduce energy use and saving money. By failing to ensure that energy is being used as well as it could be they are, quite literally, paying the price.

One reason for this could be that for energy bills are often low compared to items such as wages, research and development, and property rental. However, companies must consider other issues such as brand reputation, employee expectations and competitive positioning, while customers expect them to play an active role in reducing the carbon footprint of their operations and products.

Even more frustrating is that in many circumstances it doesn’t even involve a vast capital outlay on new technology – for example, by simply maximising the potential of an existing BEMS energy savings of 10-20 per cent are easily achievable. This could equate to a 0.1-0.4 per cent saving on a company’s total cost base, instantly increasing profitability.

When a BEMS is first commissioned it is configured around an existing building layout and occupancy patterns. These can change over time and incorrectly configured time clocks and setpoints, new layouts, and repartitioning can all lead to poor control and energy wastage.

Failure to maintain a BEMS on an ongoing basis will result in degradation of the building’s energy performance. In order to rectify this, it is advisable to undertake an audit that ascertains what can be achieved and identify any energy saving opportunities. While items such as boilers, chillers, air conditioning, and pumps can be checked to make sure they are working correctly, any maintenance issues to do with the BEMS itself or the building services equipment use can also be addressed.

BEMS providers will be able to offer expert advice on how to enhance the operation of plant by installing items such as variable speed drives. The investment can pay for itself in a matter of months – for instance a centrifugal pump or fan running at 80 per cent speed consumes only half of the energy compared to one running at full speed.

It is critical to achieve stakeholder buy-in for any business enhancement programme and by using a standard Internet browser, software based packages are available that act as a window to a BEMS. It is also possible to access utility meter readings from a BEMS and present a continually updated record of a building’s energy consumption and carbon emissions – showing employees and visitors whether they are on, below or above performance targets.

Hopefully, I have demonstrated that reducing carbon emissions and lowering energy expenditure are closely linked. The savings that can be made through the use of a correctly specified and maintained BEMS are considerable and will help achieve compliance with environmental legislation. My advice is to take action before it is no longer a choice!Trend_RGB SMALL

For further information please call Trend Marketing on 01403 211888 or email marketing@trendcontrols.com. Trend are the main sponsors of this year’s BSRIA Briefing – Smarter ways to better buildings.

You can read more BSRIA blogs about BEMS here.  BSRIA’s WMI team also produce a BEMS market report –Building Energy Management Systems (BEMS) in Europe and the USA – which is available to buy from the BSRIA website. 

A forward thinking attitude to energy management

Chris Monson, Strategic Marketing Manager of Trend

Chris Monson, Strategic Marketing Manager of Trend

Given that in parts of the world like Europe and North America some 40% of all energy used is consumed by buildings, both companies and wider society are increasingly focussing on the energy performance of their buildings, and how to improve it.

Building Energy Management Systems (or BEMS) are computer-based systems that help to manage, control and monitor building technical services (HVAC, lighting etc.) and the energy consumption of devices used by the building. They provide the information and the tools that building managers need both to understand the energy usage of their buildings and to control and improve their buildings’ energy performance. 

I’m Chris Monson, strategic marketing manager at Trend Control Systems, and I’d like to welcome you to the latest in a series of blogs where I, along with my colleagues, examine the issues affecting the building controls industry and the use of Building Energy Management Systems (BEMS).

It strikes me as somewhat bizarre that in an age where owners, managers and occupiers of commercial premises are under tremendous pressure to operate as energy efficiently as possible, so few developers recognise the long-term value of installing a fully featured BEMS at the construction stage. Such is the value and relevance of this technology, that to my mind it should be considered as important as other elements of the building services infrastructure that are designed in as a matter of course.

BEMS facilitate greater energy efficiency and the cost savings and the environmental benefits that can be experienced as a result of investment in this technology are considerable. A fully integrated solution can have up to 84 per cent of a building’s energy consuming devices directly under its control, offering greater visibility of energy use by monitoring services such as heating, ventilation, air conditioning (HVAC) and lighting.

According to the Carbon Trust 25 per cent of a building’s energy is used in lighting, and it is estimated that around a third of the energy consumed in this way in non-domestic buildings could be saved by utilising technology that automatically turns off lights when space is unoccupied. In addition, air conditioning can increase a building’s energy consumption and associated carbon emissions by up to 100 per cent, making it imperative that its use is tightly controlled.

So why isn’t the design and installation of a BEMS happening in the initial stages of a construction project? I’m afraid that the answer comes down to a combination of cost and lack of foresight. However, to fully understand why these two factors are proving so prohibitive to BEMS implementation, we need to understand a little more about the mind-set of the developer.

Developers tend to fall into two broad groups – there are those that configure buildings for others to inhabit and others who design and build premises for their own use.

When it comes to the former, the main driver is to save costs at the construction phase and little thought is given to the building’s future occupants and how they use the building. As there are no regulations stating that a BEMS must be installed, there’s a strong possibility that it won’t be. However, this lack of forward thinking leads to future occupants having to cope with inadequate visibility and control of their energy usage and, therefore, higher overheads and a larger carbon footprint.

Regarding the second group, it often comes down to the failure of owners to specify the need for a BEMS at procurement stage and make sure that they have systems in place that will maximise the energy saving potential of the building. While this type of developer will also have one eye on the cost of the project, the increased capital costs of installing BEMS is easily countered by the return on investment (ROI), with an average payback of just three and a half years.

Whichever way you look at it, the fact is that on a ROI basis early stage BEMS implementation makes sound economic sense. It can form less than one per cent of the total construction expenditure and energy savings of 10-20 per cent can be achieved when compared to controlling each aspect of a building’s infrastructure separately. The benefits don’t stop there either, as if it is incorporated with smart metering, tariff changes can be used to offer a strategic approach to energy management and control, and the data produced gives clear signposts for potential improvements.

I firmly believe that in the current business climate to construct a new build property without a comprehensive BEMS borders on foolhardiness. Organisations are faced with growing pressure to demonstrate carbon reduction policies and do all they can to lower their energy use.

Despite the controversy surrounding the introduction of the CRC Energy Efficiency Scheme, it is here to stay and is likely to extend its scope to incorporate more businesses in the future. In addition, The Climate Change Levy (CCL), Display Energy Certificates (DECs) and Energy Performance Certificates (EPCs) also affect businesses, while compliance with certification standards such as ISO 50001 put the onus on companies to demonstrate continual improvement in this area.

It should also be remembered that building occupiers are demanding greater visibility and transparency of their energy consumption and need access to data. A failure to meet this demand could mean that prospective tenants decide to go elsewhere.

Standardisation is playing an ever more prominent role and the most significant is EN 15232, which describes methods for evaluating the influence of building automation and technical building management on the energy consumption of buildings. It enables building owners and energy users to assess the present degree of efficiency of a BEMS and provides a good overview of the benefits to be expected from a control system upgrade. The use of efficiency factors means that the expected profitability of an investment can be accurately calculated and I’m pleased that a growing number of organisations are reviewing this document and implementing some of the best practice guidance it offers.

There are those who feel that regulation is the only way to make sure that BEMS are installed at the point of initial construction, although others are reluctant to see the introduction of more onerous legislation on an already pressured construction sector. At this stage I think that regulation shouldn’t be necessary if a long-term approach to energy efficiency is factored in and the benefits of a BEMS are recognised by more developers in the initial stages of a project.

Trend_RGB SMALLFor further information please call Trend Marketing on 01403 211888 or email marketing@trendcontrols.com. Trend are the main sponsors of this year’s BSRIA Briefing – Smarter ways to better buildings.

You can read more BSRIA blogs about BEMS here.  BSRIA’s WMI team also produce a BEMS market report – Building Energy Management Systems (BEMS) in Europe and the USA – which is available to buy from the BSRIA website. 

%d bloggers like this: