Goodbye BIM… Hello digital

This blog was written by Ben Roberts, Associate and BIM Delivery Leader at Hoare Lea

This blog was written by Ben Roberts, Associate and BIM Delivery Leader at Hoare Lea

When BIM first reached the masses in about 2010 it was exciting: finally the construction industry wakes up to the 21st century and embraces the ability of computers to take on our more mundane tasks and improve communication! A data-centric approach to managing projects meant that appointments would be clearer, design computation could yield instant feedback, models would feed directly into fabrication robots and building operators could simply and efficiently access all the information about their assets at the click of a button.

However in 2015 there seems to be a wide spread consensus that BIM is just an expensive, less flexible way of delivering projects, and sadly the acronym is often a sure fire way of clearing a room.

So beyond the UK government’s level 2 BIM deadline in April 2016 there is no “level 3 BIM”; instead it is “digital built Britain”. And the industry is following suit; let’s remove this acronym with too much baggage and stigma and get down to what it really means: sensible data management, better quality communication of design intent, easier and more effective collaboration, and many opportunities to do things more quickly and accurately.

When thinking about “digital” rather than “BIM”, we find ourselves asking a more straight forward question: what can computers and data do for us?

Firstly, computers are capable of recording vast amounts of data and processing it very quickly, but to date they’re not so good at the more creative stuff; that’s what people are for. So it follows that we can “outsource” a lot of our thinking time to a processor by offloading the more mundane, repetitive tasks, leaving our creative minds to focus on the more interesting things. Good technology should allow people to spend less time alone staring at a computer!

As an example, BREEAM is a way of addressing a very important aspect of our building design (environmental impact) but is often seen as a time-consuming form filling exercise. This is a terribly boring thing for a human to do, but provides essential information in a usable common structure. This is exactly what computers are good at, so let’s automate this important but boring compliance process so that humans can get on with doing the interesting important tasks.

Ben Roberts blogWe are now also capable of doing things that were previously impossible or impractical. Virtual reality and augmented reality are now becoming cheaper and easier; anyone with a smartphone has a choice of free apps to upload your 3D models, and if oculus rift is outside your budget, try google cardboard for just £6! The MX3D Amsterdam bridge project is proving that 3D printing is not just for small objects; perhaps entire pipework systems could be printed on site too? Many other emerging technologies are presenting completely new options: reality capture, the internet of things, cloud computing, wearable technology and visual scripting are just a few examples.

Secondly, data can be very informative if you know what to do with it. Buildings can potentially generate enormous amounts of data, and in the right hands that can quickly be used to assess energy performance, make comparisons of different technologies, or identify faults in building systems, for example.  Raw data is daunting, but visualisation of that data is easy and provides a more immediate form of interpretation. As 2 examples, graphs and infographics are clear methods of showing key statistics and are easily generated in Excel, and 3D models give an intuitive interface to accessing associated data at various stages in a project lifecycle.

Finally, you don’t have to be a computer scientist to use a computer these days – my grandad is 95 years old and controls his heating remotely using his iPad. Much of the software available for design, construction and operation of buildings is going this way too. Virtual reality is a good starting point for the technologically averse, but there are plenty of other technologies that offer simple solutions for anyone.

So I encourage you all, upon hearing the acronym “BIM”, not to run for the hills but to simply consider what computers and data can do to help you.

Ben is a chartered mechanical engineer and holds the position of BIM Delivery Leader for Hoare Lea, a role which involves pushing the boundaries of software tools and enabling teams to deliver BIM projects as efficiently and effectively as possible around the practice in the UK and Middle East. He specialises in using BIM models for design calculations. Ben is an active member of the CIBSE BIM steering group, the BSRIA BIM Network, and is involved in developing many industry standards for MEP BIM delivery. He has written articles for a variety of construction industry journals on the subject of BIM, and regularly presents and lectures on the subject around the world.

The BIM Level 2 jigsaw – nearly complete?

The Level 2 programme was defined in the BIM Strategy which is available at  www.bimtaskgroup.org

The Level 2 programme was defined in the BIM Strategy which is available at
http://www.bimtaskgroup.org

In my blog article back in June  I discussed how the UK Government had refined its Level 2 BIM requirement and express it in the form of compliance with seven components:

  1.  PAS 1192-2:2013 Specification for information management for the capital/delivery phase of construction projects using building information modelling
  2. PAS 1192-3:2014 Specification for information management for the operational phase of assets using building information modelling
  3. BS 1192-4:2014 Collaborative production of information. Part 4: Fulfilling employers information exchange requirements using COBie – Code of practice
  4. Building Information Model (BIM) Protocol
  5. GSL (Government Soft Landings)
  6. Digital Plan of Work
  7. Classification

Since then BS 1192-4 has been published, leaving just the Digital Plan of Work and Classification elements to be completed.  As reported previously, these were the subject of a TSB-funded competition and I thought it would be useful to give an overview of how the competition went and where it is now.  This is a fundamental piece of work that is set to have a huge impact on BIM in the UK and it is vital that as much of the industry as possible has an awareness of what is happening, and get involved wherever possible to help make it a success.

The competition brief was developed, with industry consultation, and has been administered via the Innovate UK (formerly TSB) SBRI programme under the title “A digital tool for building information modelling”.

The competition process involved two phases – Phase 1was a feasibility study, with organisations or consortia invited to submit proposals with funding of up to £50k (including VAT) available to each.  Three teams were awarded these phase one contracts:

  • RIBA Enterprises Limited, together with BIM Academy, BDP, Laing O’Rourke, Microsoft and Newcastle University
  • BRE Global Limited, with buildingSMART UKI
  • CIBSE on behalf of a group of industry professional bodies known as C8, consisting Association for Project Management (APM), British Institute of Facilities Management (BIFM), Chartered Institution of Building Services Engineers (CIBSE), Chartered Institute of Building (CIOB), Institution of Civil Engineers (ICE), Institution of Structural Engineers (IStructE), Royal Institute of British Architects (RIBA) and Royal Institution of Chartered Surveyors.

The results of the Phase 1 stage can be seen here.

On completion of Phase one, two of these submitted bids for Phase 2 – RIBA Enterprises Limited and BRE Global Limited, and RIBA Enterprises Limited was awarded the single Phase two contract.

At the time of writing, the results of the Phase two competition had not been posted on the Innovate UK website so it has not been possible to compare what RIBA Enterprises has said it will deliver with the functional specification.

As RIBA Enterprises has developed Uniclass2, which it uses for some of its other software tools, it is probably safe to assume that the classification solution delivered as part of this competition will be based on that format.  That being the case it will be interesting to see how Uniclass2 is developed to cover all necessary instances, and not just those which may occur within the 3D model.  The classification system needs to be capable of capturing everything which may be held within the common data environment (CDE) in order to make the objectives of the standards such as PAS 1192-2 and PAS 1192-3 a reality – the PIM during construction and AIM during operation being the sole sources of information for further use, having been verified and validated against the EIRs and OIRs.

Many experienced BIM practitioners recognise the need for a comprehensive classification system to make information available throughout the life of an asset, letting it be used time and again rather than having to recreate it, and this project could make this a reality.  However, careful thought needs to go into it to make sure that everything that needs to be classified can be, and in a way that can be understood.

%d bloggers like this: