BSRIA Residential Network launch

saryu2

This blog was written by Saryu Vatal, Senior Consultant and Researcher for BSRIA Sustainable Construction Group

The BSRIA Residential Network was launched on the 11th of September, kindly hosted by the Wellcome Trust and well attended by over 50 delegates, comprising of both members and invited guests.  Ian Orme Business Manager for the Sustainable Construction Group welcomed the delegates and introduced briefly the intention of the network and how BSRIA would like to engage with all stakeholders to help make residential development better.

The event was chaired by Richard Partington of Richards Partington Architects, architect advisor for the Zero Carbon Hub and co-chair of the steering group for their Performance Gap project.

The day started with a summary of the current policy context for energy efficiency standards in new homes and challenges and opportunities for low energy retrofits.

The recently concluded Performance Gap project for the DCLG provided a starting point for discussing issues that impacted new build residential developments. For this project, an extensive evidence gathering and review exercise was carried and over 60 issues were identified as contributing to the gap between the designed and measured energy use in homes.  Of these the ones prioritised for action and further research, along with the shortcomings in skills and knowledge highlighted through the end-to-end process review of over 20 new developments,  formed the core of the Hub’s recommendations to the Government.

Rick Holland was present to give an update on the Government’s continued support for funding research into construction processes via Innovate UK (previously Technology Strategy Board), both for domestic and non-domestic buildings.

A major programme from this funding stream looking at Building Performance Evaluation is coming to a close at the end of September and early stage findings from meta-data analysis were presented by Ian Mawditt of Fourwalls.  This focused on the common issues found with the design, installation and operation of MVHR systems and data from whole house co-heating tests. The final findings will be disseminated via Innovate UK and will include information from all projects across the seven funding tranches.

The analysis of key design specifications that would impact the performance of the mechanical ventilation systems raised some interesting observations about common assumptions made at early design stages.  Common themes from the commissioned air flow rates were also discussed.  The performance of homes built to Passivhaus standard was notably better, which emphasised the importance of process control on site, but also highlighted the fact that, when needed, the industry was able to deliver a high quality product (homes).

The presentations of the day concluded with a summary of how BSRIA would like to engage with its members to try and address various shortcomings identified through research.  Members are invited to put forward areas where there is a need for additional support, in the form of training, guidance and impartial technical expertise.

Calculator leaned on a little house with red roofA panel discussion was facilitated by the event chair in which a range of topics were discussed.  These included issues around the effective design, installation and modelling of district heating in residential and mixed use schemes and variations in standards and assumptions between the EU and the UK.  Ashley Bateson was able to provide an update on standards being developed by CIBSE.

The conflict between supporting innovative technology and the confidence in product and performance data to allow these to be accepted into mainstream and within compliance tools was also highlighted as an area of concern.

The impact of users on the actual energy performance in homes has not been included in some key research projects although in reality this has significant impact.  While this lies beyond the scope of a developer’s influence, key decisions about the complexity of services, controls interface and handover procedures all contribute towards the usability of homes.  Instances of how internet based tools and were successfully employed in some projects to engage with occupants to develop a feedback and learning mechanism were highlighted.

There were concerns voiced about the problem of overheating in new and newly refurbished homes, especially when dealing with vulnerable occupant groups like the elderly.  The Zero Carbon Hub are working on a project looking at the evidence and aim to help develop the assessment standards and methods for evaluating and mitigating risks in new homes.

BSRIA sees itself well-placed to engage with its members and the wider industry to help address the various shortcomings and areas of concern highlighted.  Subsequent network events have been planned to focus on specific topics in detail and we are seeking feedback from members to help structure our efforts in the most effective and useful manner.

Presentations from all speakers can be found on the networks page of the BSRIA website.

Safety in Building Services Design

This is a guest post by Richard Tudor of WSP

This is a guest post by Richard Tudor of WSP

Space, and the cost of providing space, for plant and building services  distribution is at a premium and designers often come under pressure to reduce the spatial requirements for building services installations. In order to discharge their obligations, designers must take care to provide safe means of access for installation, maintenance and equipment replacement.  In addition designers need to be aware of the regulations and legislation requirements that a design may impose on the installer and end user as a design solution can often impose additional legal

responsibilities, particularly in undertaking associated operation and maintenance activities. However, the active and continuing attention to safe access issues, throughout the design stages, is not always achieved as the designers’ attention can often concentrate on what is perceived to be more immediate concerns.

BSRIA’s publication Safety in Building Services Design BG55/2014 has just been published which provides guidance on designing for safety in both new and refurbishment projects.

The publication is aimed at designers and includes information on:

  • relevant legislation including CDM
  • hazards and risks including managing risk in the design process
  • understanding space requirements and access provision
  • designing for maintenance
  • plant room design
  • communication of risk information including representation of risk information on drawings
BG55/2014 Safety in Building Services Design

BG55/2014 Safety in Building Services Design

However, the diversity in type, configuration and possible location of plant, means it is not possible for this publication to give definitive guidance for all installations.

The publication provides a practical guide to assist the design process, aid design reviews together with providing a better understanding in designing for safety.  For example, included in the publication is a checklist on the considerations in designing for health and safety which can be used as part of the technical design quality review process.  In the pdf version of the publication this is included in an editable Excel format. Influencing factors, considerations and space requirement data useful in the design decision process with respect to providing safe access are highlighted in the publication.

The poor provision of safe access for maintenance could result in an increased likelihood of cutting corners or omission of maintenance and repair activities. This in turn, could result in building services failures that could adversely affect safety, legal compliance, productivity and quality of the environment.

BSRIA launches a new course on the 12th November 2014 providing guidance in designing for health and safety in the space planning of building services with respect to operation, maintenance and plant replacement. The course is intended for professionals involved in the design of building services but is equally relevant to contractors and other professionals within the industry. Young engineers in particular would benefit from the course.

On completion of the course delegates will be able to:

  • understand the specific considerations with respect to designing for safety for building services
  • identify discipline specific considerations in designing for safety
  • challenge designs in relation to health and safety in the design, construction and operations of building services so as to improve performance
  • understand relevant H&S legislation, codes of practice and guidance
  • understand the relationship between building services design and maintenance operations
  • understand the management of hazard and risk together with control strategies
  • locate information relating to health and safety to assist in design process
  • understand the consequences of failing to manage health and safety effectively
  • understand the importance of communication and provision of information in the design process

Richard Tudor is a Senior Technical Director at WSP and has been an integral part of the WSP Group Technical Centre for over 14 years. His responsibilities include technical quality, specification development, technical knowledge management, delivering training, designing for safety, providing technical support, and improving project delivery.

%d bloggers like this: